Design, manufacture and installation of a textile façade of 8m height by 58m length, made of PVC Mesh for an office building in Madrid. The objective was to modernize the look of the building by means of an architectural remodelling. This exterior layer provides UV protection in the summer and shields from cold wind in … Continue reading
Manufacture and installation of 4 four-cornered tensed canvas sails (6 x 5m, 9 x 5m, 7 x 5m, 11 x 5m) for the ‘Chill Out’ break area of the BBVA central data headquarters in Madrid. Project Execution: Carpatec® Location: Sede BBVA – Madrid Date: … Continue reading
Manufacture and installation of 2 five-cornered tensed canvas paraboloids, providing shade for the playground in Kings College, Tres Cantos. Project Execution: Carpatec® Location: Madrid Date: … Continue reading
Manufacture and installation of an arched textile cover of 26 x 12.5 meters, covering a children’s playground in the Agrupación Deportiva San Juan (Pamplona). Inclined double arch design made from zinced steel. Type II textile cover, 900grs. Project Execution: Carpatec® Location: Pamplona Date: … Continue reading
Manufacture and installation of 2 arched-shaped textile covers of 20 x 11m and 15 x 11m to cover two playgrounds. The designs were a single arch structure and a double arch structure, made from zinced steel. Type II textile cover, 900grs. Project Execution: Carpatec® Location: Orkoien – Pamplona Date: … Continue reading
Manufacture and installation of an 8-point 22 x 7m tensed textile cover for a cruise ship in the Mediterranean Sea. This wave-shaped structure provides shade for the ship’s outdoor restaurant. Project Execution: Carpatec® Location: Athens, Greece Date: … Continue reading
Manufacture and installation of a double-arch textile cover of 23 x 14 meters, covering a playground in Navarra. Made from zinced steel and Type II textile cover, 900grs. Project Execution: Carpatec® Location: Ansoain – Navarra. Date: … Continue reading
Confección e instalación de 2 lonas tensadas de 4 puntas ( 4 x 7,5 mts y 15 x Manufacture and installation of 2 four-pointed tensed paraboloid sails of 4 x 7.5m and 15 x 13m made of microperforated fabric from Mehgies Texnologies, providing shade for a playground in Alaquas, Valencia. Project Execution: Carpatec® Location: Alaquas … Continue reading
112 square meter elliptical shaped structure made from two 17.62-meter-long arches at a height of 7.10m and 4.40m. The rear arch is supported by a pair of columns, and have 4 bracing elements that hold the front arch in place. Both arches are tilted in order to counteract the tensile forces from the membrane. Type … Continue reading
Manufacture and installation of 56 four-pointed tensile membranes made of Opaque PVC and Microperforated canvas. This installation provided a new, modern look to a 30 year old shopping centre. Project execution: Carpatec® Location: Fuenlabrada, Madrid. Date: … Continue reading